How to Build a CNC Plasma Cutter

Course Feature

Cost

Free
Provider

Youtube
Certificate

Paid Certification
Language

English
Start Date

On-Demand
Learners

No Information
Duration

1.00
Instructor

Dr. D-Flo

Add to Favorites

2.5

3 Ratings

This course provides an overview of how to build a CNC Plasma Cutter. It covers the parts and overview, mechanical assembly, floating head, stand assembly, electrical wiring, blackbox motion controller, firmware and control software, water table, and high frequency noise. It is a comprehensive guide to building a CNC Plasma Cutter, from start to finish.

Show All

Go to class

Course Overview

❗The content presented here is sourced directly from Youtube platform. For comprehensive course details, including enrollment information, simply click on the 'Go to class' link on our website.

Updated in [February 21st, 2023]

This course provides learners with the knowledge and skills to build a CNC Plasma Cutter. Learners will gain an understanding of the parts and components needed to construct a CNC Plasma Cutter, as well as the mechanical assembly, electrical wiring, and software setup. They will also learn about the power and air requirements, cutting speeds, and how to use Fusion 360 CAM to cut parts. Additionally, learners will gain an understanding of the high frequency noise and how to use the Cutmaster 40 and OpenBuilds CAM to control the CNC Plasma Cutter. Finally, learners will be able to apply their knowledge to create projects with the CNC Plasma Cutter.

Show All

Recommended Courses

AC Servo Motors and FogBuster Mist Coolant (DIY CNC Mill Upgrades 1)

1.5

Youtube 1 learners

Learn More

This course covers the installation and tuning of AC servo motors and FogBuster Mist Coolant for DIY CNC Mill Upgrades. It includes topics such as servo vs stepper motors, MQL systems, compressed air setup, relay & flyback diode, atomizing, and test cut. Participants will learn how to install servo motors and FogBuster, as well as how to achieve faster rapids.

Rigid Tapping with New Motor and VFD (DIY CNC Mill Upgrades 3)

2.5

Youtube 1 learners

Learn More

This course covers the upgrades to a DIY CNC Mill, focusing on Rigid Tapping with a new motor and VFD. It introduces tapping and threads, tension compression tapping, thread milling, and the use of a general duty motor and Marathon Inverter Motor. It also covers motor mounting plates, taper lock pulleys, and the decision to DIY or buy a CNC Mill, as well as belting. This course provides all the necessary information to upgrade a DIY CNC Mill.

Introduction to CNC Programming

4.3

Udemy 6,695 learners

Learn More

This course is perfect for CNC Router owners, machinists, and DIY enthusiasts who want to learn the basics of CNC programming. It covers the fundamentals of GCode, the language of CNC machines, and provides step-by-step instructions for programming parts. The course also covers MCODES Cycles, the Cartesian coordinate system, tooling, cutter compensation, and more. With 5 full CNC programs, you'll learn tips and tricks used by professional CNC machinists to get the results they need. After completing this course, you'll be able to program any shape using GCODE.

Fusion 360 tutorial for CNC machinists

4.6

Udemy 2,747 learners

Learn More

This course is perfect for CNC machinists, hobbyists and professionals who want to learn how to use Fusion 360 to produce parts for their CNC machine. Written by a machinist for machinists, this course starts by getting you familiar with the parts of Fusion that are needed to produce a component on a CNC machine. It then covers 3D milling roughing cycles, finishing passes, engraving, and how to adjust CAM tool paths to produce excellent results. With Fusion 360 being free for hobbyists, startups and makers, this course is the perfect way to learn how to use this powerful CAD/CAM system.